![]() ![]() ![]() The display says the UDDS calibration failed. The scanner will run the document and you will see a 'UDDS Calibration Succeeded' screen.Ensure 'Multifeed Calibration' is highlighted on the screen and press the 'Play'-triangle button.Place a blank sheet of white paper in the input tray.Use the arrow buttons to highlight the 'Calibration' line and press the 'Play'-triangle button.Running Multifeed calibration on your S2050/S2070 If your consumables need to be replaced, you can purchase them by contacting your Kodak Alaris reseller - See consumables catalog Do consumables such as the feed module and/or separator need to be replaced? Open the scanner and check to see if the rollers are worn / dull. ![]() Is your scanner properly connected to your PC by the USB cable?.See the suggestions below to try and fix your problem: Some or multiple pages get taken into the scanner at once Pages are not being fed through the scanner No, my scanner is making abnormal / loud noises No, my scanner cannot connect to my PC / scan at all Yes, my scanner can, or at least try to, scan an image Is your scanner able to connect to your PC and attempt to scan an image? Try plugging in another electrical device to the outlet your scanner is connected to verify the outlet has a working electrical connection.Check both ends of the connection between your power outlet and the scanner._ Hardware Help Walkthrough Are you able to turn your scanner on? What aspect of the S2040 / S2050 / S2070 are you having problems with? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |